The Riot comes configured for the FrSky XSR/X4R receiver. For other receivers, these settings can be customized in Betaflight – Configurator, an open source flight controller software available for free from the Google Chrome Store.
- Launch the app and connect the Riot to your computer via micro USB.
- Press the Connect button in the top right corner and open the Configuration tab.
For Spektrum receivers
From the Configuration tab, change Serial Receiver Provider to SPEKTRUM2048.
Switch to the Receiver tab in BetaFlight.
From the Receiver tab, change the Channel Map to Spektrum. Click save in the lower right corner of Betaflight to adjust the configuration.
For FrSky PPM receivers
From the Configuration tab, switch the Receiver Mode from RX_SERIAL to RX_PPM. Click save in the lower right corner of Betaflight to adjust the configuration.
For FrSky SBUS receivers
The Riot is pre-configured for FrSky XSR/X4R, so this step is already done!