From the main menu, yaw right and pitch forward again to move through the setting control screens.
The first screen shows Frequency Selection. Move the “>” up and down with the right stick. Yaw right to cycle through values.
Once the desired Band and Frequency are selected, move down to SAVE+EXIT with the Right stick and Yaw right to confirm. OSD will reboot on the new Frequency.
The second screen shows Statistics, which automatically pop up after each flight.
Advanced user also have the option to explore the screens on PID Config, Voltage, RC Tuning, RSSI, Current, Advanced and Advanced Tuning.
The final Display screen controls what shows on the main screen:
Horizon: a line parallel to the ground to help maintain orientation.
Side Bars: vertical HUD sidebars
Scrolling Bars: sidebars that move in direction of change for altitude and speed
Throttle: amount of throttle.
GPS Coords: the GPS coordinates if external GPS sensor has connected to the Riot.
Sensors: output from any external sensors connected to the Riot.
The OSD can also be configured from a laptop or desktop computer. Download MWOSD GUI from www.thrust-uav.com/support. Connect the flight controller to the computer with a FTDI adaptor, FTDI and serial-to-JST SH 6 pin cable.