Riot Sport & Arm Pack Bundle
almost ready to fly spare arms bundle
TUV_2011&&TUV_2027&&TUV_2028

$479.99

Our Riot 250R Sport Flyer Kit is designed for pilots with their own flight and FPV gear ready to go. The flyer kit is simply the complete Riot 250R Sport drone minus the radio and FPV components.

Kit Includes:

  • Riot 250R Sport
  • Mounting hardware
  • Super strength battery strap
  • Motors, props, and ESCs (electronic speed controllers)
  • Complete FPV camera kit
  • Front arm pack
  • Rear arm pack
Made in the U.S.A.
Clear
SKU: TUV_2011&&TUV_2027&&TUV_2028 Category:

Description

The new Riot 250R Sport Flyer from Thrust-UAV, our Almost-Ready-to-Fly racing drone kit, was inspired by racers to deliver amazing performance from a ready-to-go package. Simply add your controls and FPV goggles and you’re ready to fly. The Riot 250R Sport features a 250mm carbon fiber body designed to run 5 inch props along with an HD camera feed to give you the edge on the race course. An F4 processor keeps the Riot’s integrated flight system ahead of the curve and boasts the features champions desire.

Additional information

Weight 19 lbs
Dimensions 18 x 12 x 12 in
Channel Credit

thrust-uav, hazak_fpv, _furadi_, spaz_fpv

Features & Specs

  • H-frame with a 250mm wheelbase
  • Finely tuned CG for X, Y, and Z axis
  • Flight system and FPV protection
  • Reinforced protective undercarriage
  • F4 modular integrated flight system and OSD (on screen display)
  • 49 addressable RGB LEDs with software configurable color
  • Amazing fit-and-finish detail from fasteners to wiring
  • Front arm pack
  • Rear arm pack

Kit Profile

  Weight 420 grams without battery;
  Top Speed 85 MPH with 4s full charge;
  Endurance 3 – 6 minutes at racing speeds;
Camera Complete FPV camera kit;
Antenna Sport RX/TX antenna;
Motors DYS 2205~2550KV brushless;
Propellers Gemfan tri-blade;
Battery Not included with kit; 4s LiPo recommended;
Transmitter Not included with kit; Taranis X9D Plus radio recommended; 1.5km line of sight;
Receiver Not included with kit; Full range FrSky XSR 2.4GHz telemetry receiver recommended;
Goggles Not included with kit; FXT Marvel Vision 5.8 GHz FPV goggles recommended;
Charger Not included with kit; Battery charger (iSDT SC-608 150W 8A MINI) with power supply recommended;

Warranty

PCS Edventures/Thrust UAV warrants each new RIOT 250R Pro manufactured and sold to be free from defects in material, workmanship and construction, when used in accordance with the technical instruction provided, will perform to applicable specifications for a period of 30 days from the date of purchase.

THIS WARRANTY DOES NOT APPLY TO EQUIPMENT OR GOODS WHICH ARE MISUSED, OR ABUSED, OR DAMAGED FROM INSTALLATION, OR NOT USED IN ACCORDANCE WITH SELLER’S INSTRUCTIONS. NORMAL WEAR OF EQUIPMENT OR GOODS ARE NOT INCLUDED IN THIS WARRANTY.

Equipment or goods not manufactured by the Seller but supplied through the Seller shall carry the warranty of the original manufacturer.

THE SELLER’S SOLE LIABILITY UNDER THIS WARRANTY SHALL BE LIMITED TO EITHER REPLACING OR REPAIRING WITHOUT CHARGE, AT ITS FACTORY OR ELSEWHERE AT ITS DISCRETION, ANY EQUIPMENT OR GOODS NOT MEETING THIS WARRANTY, OR AT SELLER’S OPTION, REFUNDING THE PURCHASE PRICE. THE SELLER SHALL IN NO EVENT BE LIABLE FOR ANY OTHER DIRECT OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND UNDER THIS CONTRACT OR OTHERWISE.

The warranties of the Seller do not cover, and the Seller makes no warranty with respect to any defect, failure, deficiency, or error which include but are not limited to:

(a) Not timely reported to the Seller; or
(b) Due to misapplication, modification, disassembly, abnormal conditions of temperature, dirt or corrosive matter; or
(c) Due to operation, either intentional or otherwise, above rated capacities or in an otherwise improper manner. Seller assumes no responsibility for the quality or performance of coatings, adhesives or other materials used with Seller’s equipment or goods.

If examination by PCS Edventures/Thrust UAV discloses that the product has defective components, then PCS Edventures/Thrust UAV obligation is limited to repair or replacement, at PCS Edventures/Thrust UAV option, of the defective unit(s) or its components.

PCS Edventures/Thrust UAV is not responsible for products which have been subject to misuse, alteration, accident or for repairs not performed by PCS Edventures/Thrust UAV or its authorized agents and additional charges may be incurred by the buyer for diagnostic and/or repair functions performed by PCS Edventures/Thrust UAV staff.

The foregoing warranty constitutes PCS Edventures/Thrust UAV sole liability. PCS Edventures/Thrust UAV WARRANTY CLAUSE THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

PCS Edventures/Thrust UAV shall not be responsible for any incidental or consequential damages arising from any breach of warranty.

RMA POLICY In the event that a product fails, contact PCS Edventures/Thrust UAV at the telephone number below or send an email to dev@thrust-uav.com with the following information:

Thrust UAV 11915 West Executive Drive ~ Suite 101 ~ Boise ~ Idaho ~ 83713 (208) 297 – 6691

  1. Contact person and telephone number at which they can be reached.
  2. Name and location of where product was purchased.
  3. Products serial number & date of manufacture if possible, or your purchase order number.
  4. As complete a description of the problem. Many cases we can troubleshoot the problem and correct it by telephone, email. In some cases, we may need to replace the product under warranty. In the event that a replacement product is to be sent out, we will do so on a 1:1 replace / return policy.

NO RETURNS WILL BE ACCEPTED WITHOUT AN RMA AUTHORIZATION FROM PCS Edventures/Thrust UAV We will issue this number and RMA form to be included with the returned items. Fixtures must be returned properly packaged and free from any damage or modification in any way, with transportation charges at the expense of Customer, to PCS Edventures/Thrust UAV; return transportation charges will be F.O.B. PCS Edventures/Thrust UAV. No parts shall be returned unless a return authorization number (RMA) is received, which will be furnished upon request. Product that is damaged during the return due to inadequate packaging will not be accepted and return credit will not be issued. We recommend that all packaging on the replacement product be saved and utilized for the RMA products. All RMA returns must be specified as “Warranty Return” on all shipping documents by Customer. Any charges arising from deviance from this directive will be borne solely by Customer.

SHIPPING CHARGES Customer will pay shipping charges from PCS Edventures/Thrust UAV to customers’ delivery location.

Regulatory

FPV REGULATORY NOTICE The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a “HAM” amateur radio license. Learn more about HAM licenses. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Thrust-UAV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government’s regulations. By purchasing an FPV product, you agree to have read and to understand this notice.

You may also like…