$39.99
SKU TUV_2201
Straight from HelioRC®, the SPRING flight controller is supported by multiple open-source flight controller software including Betaflight’s 3.3+ most current technologies. Featuring true 32khz processing without overclocking and the IMU-F filtered gyro technology, the SPRING keeps you on the cutting edge of high performance.
Key Features:
- F4 & F3, STM32F405 & STM32F301 processing
- Full DSHOT and MULTISHOT support
- Receiver supports PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V power
- Telemetry supports FrSKY Smart Port®, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. built-in inverter for FrSKY telemetry
- 5 full serial ports (UARTs). UART1 and UART2 have inverters for S.Bus and SmartPort® telemetry
- Dedicated port for 5V (100mA max) buzzers
Description
Straight from HelioRC®, the SPRING flight controller is supported by multiple open source flight controller software including Betaflight’s 3.3+ most current technologies. Featuring true 32khz processing without overclocking and the IMU-F filtered gyro technology, the SPRING keeps you on the cutting edge of high performance. Never before seen IMU-f system an advanced inline discrete filtered gyro that is transparent to the flight controller. With a super clean discrete filtered gyro, more processing power is available for flight controller logic and future feature updates without causing slowdown or issues during flight.
Additional information
Weight | .25 lbs |
---|---|
Dimensions | 6 × 6 × 1 in |
Channel Credit | thrust-uav, hazak_fpv, _furadi_, spaz_fpv |
Features & Specs
- F4 & F3, STM32F405 & STM32F301 processing
- ICM 20601 internal measurement
- Full Betaflight OSD support
- Full DSHOT and MULTISHOT support
- Receiver supports PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V power
- Telemetry supports FrSKY Smart Port®, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. built-in inverter for FrSKY telemetry
- 5 full serial ports (UARTs). UART1 and UART2 have inverters for S.Bus and SmartPort® telemetry
- Dedicated port for 5V (100mA max) buzzers
- Voltage sensing analog inputs up to 26V, current and RSSI inputs (3.3V max).
- Supports VBAT up to 6s with voltage regulator 2.5A continuous 3.2A burst or 5v in (switchable with jumper pads)